Today's HoursMonday 8:30AM - 5:30PM
| Monday | 8:30AM–5:30PM |
| Tuesday | 8:30AM–5:30PM |
| Wednesday | 8:30AM–5:30PM |
| Thursday | 8:30AM–5:30PM |
| Friday | 8:30AM–5:30PM |
| Saturday | 8:30AM - 3:00PM |
| Sunday | Closed |
New Equipment
MacDon FD1 Series FlexDraper
-
ID # 31764543
- Back ID:31764543
- Get Directions
|
FD1 Series FlexDraper® Headers Most combine headers perform well in perfect harvest conditions, but when was the last time you had perfect conditions? MacDon FlexDraper® and Draper Headers are designed to maximize productivity in the toughest harvesting situations. |
Imitated but never duplicatedFeaturing MacDon Flex-Float Technology®, FD1 Series FlexDrapers continue to advance harvesting innovation. The flex advantage comes from a fixed reel-to-cutterbar relationship, which maintains a small gap between the reel fingers and cutterbar, while the Active Float System allows for instant lateral and vertical float response over rolling and uneven terrain. The result of our Flex-Float Technology is smooth, consistent, heads-first feeding that significantly boosts combine productivity. |
| Size | 7.6 M (25') | 9.1 M (30') | 10.6 M (35') | 12.2 M (40') | 13.7 M (45') |
|---|---|---|---|---|---|
| Weight* Single Knife Drive With FM100 | 3067 kg (6760 lb) | 3384 kg (7460 lb) | 3520 kg (7760 lb) | 3733 kg (8230 lb) | - |
| Weight* Double Knife Drive With FM100 | - | - | - | 3797 kg (8370 lb) | 3992 kg (8800 lb) |
| Knife: Type / Drive / Speed / Guards | Single or double knife / Hydraulic, MacDon design enclosed oil bath wobble box(es) / 1050 to 1400 spm, varies depending on header size / Pointed DHT (double heat-treated), strong, mud resistant profile | ||||
| Reel: Type / Drive / Speed / Fingers | Pick-up reel, 2-piece (double) (FD125 1-piece), flip-over design, cam-leading finger control / Hydraulic / 0 to 67 rpm, varies depending on combine model / 279 mm (11") length, wear-resistant HD plastic, 102 mm (4") spacing (FD125, 152 mm (6") spacing) | ||||
| Conveyor: Type / Drive / Speed | 1057 mm (41.6") width, reversible 680.4 g (24 oz) rubber skim-coated drapers, double V-guide with tracking, integral seal on leading edge / Hydraulic / 0 to 194 m/min (0 to 636 ft/min) (Depending on combine model) | ||||
| Standard Features | Adapters for most current model combines, hydraulic fore-aft reel positioner, hydraulic header tilt, cutterbar poly wear plates, auto-header height with header angle and ground pressure indicators | ||||
| Field-Installed Options | Upper cross auger, stabilizer wheels, in-cab side draper speed control, slow speed transport, lateral tilt automatic header height control | ||||
| *All Listed Weights Are Approximations And Will Vary Depending On Header Configuration. Check With Your Dealer For Combine Ratings. Weight Includes FM100 Combine Adapter. The FM100 Combine Adapter Weighs Approximately 2400 Lb (1089 Kg); This Number Varies By Combine Model. | |||||
| Center Draper | Feed Auger |
|---|---|
| Weight | 1083 – 1171 kg (2387 – 2581 lb), varies by combine configuration |
| Size | 2000 mm (78.7") width | 1630 mm (64.1") width |
| Type | Hydraulic drive (reversible), self tracking rubber coated polyester fabric feed draper with rubber slats | Mechanical drive (reversible), removable retracting fingers with bolt on flighting |
| Speed | 107-122 m/min (350-400 ft/min), varies with combine brand | 191 - 195 rpm, varies with combine brand |
| Header Floatation: Type/Vertical Range/Lateral Range (Tilt) | 2 pairs of coil springs, independent adjustment, transport lock-out / 178 mm (7") / 4.8 degrees |
Videos
Documents
-
MD-1005C1 2020 Draper Headers for Combine Brochure ENG NA - 02-07-22 - SCREEN.pdf
-
MD-1000H4 FD2 - Documents - FD1 vs FD2 Comparison - 10-12-21.pdf
