New Construction

Single Three Point Hitch Spear   Reese receiver / ball hitch (Ball hitch not included)  Fits both CAT I & II  Kverneland tine  2 stabilizer tines  2000 lbs capacity @ 24" L.C.&...

       Skidsteer Grader   Push-pull design for grading in forward or reverse  Pneumatic swivel wheels on oscillating front axle  Extendable front axle bolster for better stabi...

Square Bale Grapple (BG6000)   Same specs and design as round bale grapple with arms to accept square bales 4 - 6 ft long and round bales 5-6 ft diameter  Opens up to 84"  Approximate weight...

Square Bale Squeeze (BG7000)   86" extended – 30" Retracted  Arms are 50” long, 20” tall  2-½" x 28" stroke cylinder  Slim brace arm design allow...

      Standard (Front End Loader) Bucket & Regular Utility Grapple   Standard (Front End Loader) Bucket & Regular Utility Grapple  Opens up to 70"  Comes with 2-&frac1...

       Standard (Skidsteer) Bucket & Regular Utility Grapple   Standard (Skidsteer) Bucket & Regular Utility Grapple  Opens up to 70"  Comes with 2-½"...

        Standard Front End Loader Bucket - HEAVY DUTY   HEAVY DUTY  ¼" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinforced top...

        Standard Front End Loader Bucket - REGULAR DUTY   REGULAR DUTY  3/16" material, ¼" end plates  ¾ X 4 bevelled cutting edge  Reinforced top...

Standard Skidsteer Bucket & Skidsteer Grapple   Designed for use on skidsteers with limited clearance for grapple arms  Comes with 2-1/2" x 8" cylinders         ...

       Standard Skidsteer Bucket - HEAVY DUTY   HEAVY DUTY  ¼" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinforced top lip&nbs...

        Standard Skidsteer Bucket - Long Lip (Heavy Duty)   1/4" material, 1/4" end plates  3/4 X 6 bevelled cutting edge  Reinforced top lip  40" deep, 24...

      Standard Skidsteer Bucket - REGULAR DUTY   REGULAR DUTY  3/16" material, ¼" end plates  ¾ X 4 bevelled cutting edge  Reinforced top lip...

      Stone Fork (Cranked Kverneland Tine)   39" Conus II cranked Kverneland tines (32" useable length)  Tines installed on 4" centres  Ruggedly built  Heavy du...

       Stone Fork (Landscape with Power Rake)   ¾" shaft diameter  1-¾" spacing between tines  Points are ½" thick, 400 Brinell high streng...

     Stone Fork (Retainer Style Tine) - HEAVY DUTY   HEAVY DUTY  1-¾" shaft diameter  2-¾" spacing between tines  Points are ¾" thick, 400 ...

   Stone Fork (Retainer Style Tine) COMPACT DUTY   1" Shaft diameter  2-½" spacing between tines  Points are ⅝" thick, 400 Brinell high strength steel  23&q...

   Stone Fork (Retainer Style Tine) REGULAR DUTY   REGULAR DUTY  1-¼" shaft diameter  2-½" spacing between tines  Points are 5/8" thick, 400 Brinell hi...

  Stone Fork (Retainer Style Tine) with Split Grapple - HEAVY DUTY   HEAVY DUTY - UP TO 9500 LB CAPACITY  Two independent grapples  Ideal for brush & rock clean up  Ideal for awkwar...

 Stone Fork (Retainer Style Tine) with Split Grapple - REGULAR DUTY   REGULAR DUTY - UP TO 5500 LB CAPACITY  Two independent grapples  Ideal for brush & rock clean up  Ideal for awk...

       Telescopic Handler Bucket - HIGH VOLUME   ¼" material, ¼" end plates  3/4 X 6 bevelled cutting edge  Reinforced top lip  47" deep, 41&...

       Telescopic Handler Bucket - EXTRA HIGH VOLUME   ¼" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinforced top lip  55"...

        Telescopic Handler Bucket - STANDARD   3/16" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinforced top lip  43" deep, 35&q...

       Three Point Hitch Adaptor   Adapter attaches to loader then allows you to hook up to three point hitch equipment  Bottom two arms slide for easy hook-up  Comes with Ree...

Three Prong Bale Spear   Kverneland tines @ 23" spacing  Made to handle large 4' x 4' x 8' square bales  Not to be used for carrying 2 bales stacked on top of each other  Av...

Three Prong Bale Spear c/w Guard   Kverneland tines @ 23" spacing  Made to handle large 4' x 4' x 8' square bales  Available with 32", 39" or 49" tines  Frame...

Three Prong Bale Spear c/w Adjustable Guard   50" high frame with adjustable guard posts for safe handling of large square bales up to 3 high  Safety foot for roll over protection while in storag...

       Tilt Attachment   Great for Landscapers  Mounts between skidsteers and buckets with universal hitch  Hydraulic Tilt 18° left and right  5500lb capacity  &...

Tooth Bar Bolt-on  Designed to fit HLA bucket with tapered end plates  Easy to remove replaceable teeth           ...

        Trailer Hitch 2 inch Receiver   2" Receiver  Ideal for moving light trailers around the yard  Ball hitch mount on top of frame for moving goose neck trailer&...

         Tree Spade   Ideal for transplanting trees and shrubbery  Scoop made from ¼" material  33" wide  48" deep  Note: For skidsteers o...

       Weld-on Kits   Weld-on kits are one or two pieces, depending on loader mount configuration  ...

Martatch designs buckets for all types of machinery and uses       ...

Adapters   ​ Adapters are used to go from one type of mount to another. Typically, adapters will go direct from the loader boom to a Quick attach mount. Sometimes called a Carrier, but adapters can b...

Adapters   ​ Adapters are used to go from one type of mount to another. Typically, adapters will go direct from the loader boom to a Quick attach mount. Sometimes called a Carrier, but adapters can b...

Adapters   ​ Adapters are used to go from one type of mount to another. Typically, adapters will go direct from the loader boom to a Quick attach mount. Sometimes called a Carrier, but adapters can b...

Adapters   ​ Adapters are used to go from one type of mount to another. Typically, adapters will go direct from the loader boom to a Quick attach mount. Sometimes called a Carrier, but adapters can b...

Adapters   ​ Adapters are used to go from one type of mount to another. Typically, adapters will go direct from the loader boom to a Quick attach mount. Sometimes called a Carrier, but adapters can b...

Adapters   ​ Adapters are used to go from one type of mount to another. Typically, adapters will go direct from the loader boom to a Quick attach mount. Sometimes called a Carrier, but adapters can b...

The AIR-series trailer vac combines hydro-excavation with dry excavation and provides versatile power and high output with a 74-hp (55-kW) diesel Tier 4 Final engine. ...

**Vermeer ATX models are currently available in North America and the Caribbean** The ATX530 mini articulated loader is made for tough work in tight spaces. Designed with high torque from the Kubota D1305 engine at low r...

The Vermeer ATX720 compact articulated loader is designed with a combination of power, speed and agility. With a telescopic boom, heavy lifting capabilities and integrated backweights, this machine was built for a variet...

**Vermeer ATX models are currently available in North America and the Caribbean** The ATX850 compact articulated loader is built to suit a variety of tough jobs like property maintenance, landscaping or tree work. It is ...

The Vermeer ATX960 compact articulated loader has a lift capacity of 3,285 lb (1,490 kg) when straight and a machine width of 59 in (149.9 cm), allowing the versatility of a compact, yet powerful machine for the jobsite....

The Vermeer AX17 brush chipper is designed for the tree care contractor looking to do high production arborist work. Optimize crew size on the jobsite through mechanized feeding with horizontal off-set feed rollers and a...

Equipped with mechanical feeding capabilities and a 173-hp (123-kW) John Deere diesel engine, this unit will efficiently work in large land-clearing operations or on a rural jobsite. The AX19 features up to 12,000 lb (54...

Complete with an 89-hp (66-kW) GM 3.0L gas engine, the chipper is powered by a dependable electronic fuel injection (EFI) system. The BC1000XL also features a direct electronic pressure regulator that allows for greater ...

Enhanced with the modern day operator in mind, the BC1000XL is available with either a Tier 4 Final 49-hp or 74-hp (36.4-kW or 55-kW) engine that meets all the latest emission regulations. When transporting the machine, ...

Enhanced with the modern day operator in mind, the BC1000XL is available with either a Tier 4i (Stage IIIB) 74-hp or 49-hp (55-kW or 36.5-kW) engine that meets all the latest emission regulations. When transporting the m...

The electronic fuel injection engine provides improved fuel economy with 135 horsepower (101 kW). The psi engine allows for more efficient working conditions and boosts engine response under load. See your Vermeer dealer...

The Vermeer BC1500 brush chipper uses a precision-balanced 22.5-in (57.2-cm) drum with two 5-in x 8-in (12.7-cm x 20.3-cm) A8 double-sided knives to chip through material up to 15 in (38.1 cm). Powered by a Tier 4 Final ...